SenseCAP M2 Data Only

SenseCAP M2 is a LoRaWAN Gateway connected to the Helium LongFi Network and able to provide miles of wireless network coverage and data transmission capacity for LoRa/LoRaWAN devices. It provides built-in BLE, supports both Wi-Fi and Ethernet internet connection. You could easily set up the hotspot in a few simple steps via SenseCAP Hotspot App. SenseCAP Hotspot Dashboard, and Local Console are provided for users to manage the Hotspot in an efficient and easy way.

Package Contents

• SenseCAP M2 LoRaWAN Indoor Gateway *1

• Power Adapter (12V-2A) *1

• LoRa Antenna (3dBi) *1

• Antenna Base *1

Note: The Helium onboarding fee is not included in the product.

Package Contents

Interface

SenseCAP M2 Interface

LED Indicator

Mode	Status	Description
Green	Solid	Hotspot is healthy and the internet is well connected
Green	Slow Blinking	Hotspot is booting, please wait
Blue	Solid	The hotspot is ready for internet connection. Further configuration needed
Blue	Slow Blinking	Configuration mode, and will auto exit after 5 mins if no activity
Blue	Fast Blinking	Press the button for 30s until the indicator show fast flash will trigger factory reset
Orange	Slow Blinking	Firmware is updating, and please do not disconnect the hotspot or the internet
Red	Solid	Hardware issue or internet connection failure.
White	Solid	The hotspot is only with a factory firmware if LED shows solid white, and will be updated to the latest firmware automatically when it is connected to the internet

Button Modes

Mode	Description
Double Click	Quick double click will trigger a software reboot.
Press for 5s	Press the button for 5s and release until the blue indicator flash slowly will enter the configuration mode, and it will automatically exit in 5 mins if no activity.
Press for 30s	Press the button for 30s until the blue indicator flashes fast will trigger a factory reset and a software reboot. Attention: Please do NOT use this function unless suggested by official tech support.